Starting with the 2027 models, Alpacka Raft is changing the main inflation valve on its boats. The original Temper Assist Valve (TAV), used since 2017, gives way to the D7M from Leafield Marine in the UK. A new Pack-A-Pump comes with it.
The current valve: the Temper Assist Valve
Since 2017, every Alpacka Raft has carried the Temper Assist Valve. It has a wide opening, and an internal flap opens and closes as air passes, shutting as pressure builds. It is not a true one-way valve: the boat is only airtight once the valve cap is on. If the gasket inside the cap goes missing, the boat slowly loses air.
Inflating a TAV boat goes like this:
- Turn the blue dial counterclockwise to closed, and attach the inflation bag
- Push in as much air as the bag will give
- Top up with a Pack-A-Pump or by mouth until the tubes are firm
- Screw the valve cap on
- Set the boat in the water to cool, then add back the air that contracts
The inflation bag alone won’t reach working pressure (1.5–2.0 PSI). The Pack-A-Pump covers the rest, in about 30 to 40 strokes. The tube itself is printed with a warning not to exceed 2.5 PSI. To deflate, turn the blue dial clockwise to open.
Handling and leak checks are covered in the AlpackaRaft maintenance and repair guide (Japanese).
The new valve: Leafield D7M
Leafield valves have been a fixture on paddle-sport boats for a long time. NRS fits the C7 to most of its rafts and inflatable kayaks, and Kokopelli puts the D7 on its current packrafts.
The D7M is a new, smaller version of the D7. According to Leafield, it is 21% smaller in both diameter and height than the D7, with a similar flow rate to the D7 and C7, and it has a built-in filter.
Because Alpacka chose the compact D7M, there’s no need to worry about a bulkier valve on the boat.
The person behind Packraft Hokkaido has been handling Leafield valves since working as a river guide on rafts and inflatable kayaks. They are easy to work with, and there’s a reassurance in a part the industry has relied on for years.
Inflation bag and Pack-A-Pump
With the new valve, the inflation bag also gets a new fitting where it connects to the valve.
A new Pack-A-Pump made for the 2027 models is also on the way. Details are expected in December, along with the inflation steps for the D7M.
If you own a 2017–2026 boat
The Pack-A-Pump for the Temper Assist Valve will stay on sale, and replacement TAV parts will remain available.
Owners of 2017 to 2026 models can keep using the gear and parts they already have. There’s no need to replace your pump when the new one arrives.
Not sure which valve your boat has? Look at the valve. The Temper Assist Valve has a blue dial that you turn to inflate and deflate. The model year tells you too: 2017–2026 boats have the TAV, and the D7M starts with the 2027 models. Check the year before buying a pump or bag.
For choosing Alpacka Raft accessories and pumps, see the AlpackaRaft Accessory Guide.
One pump for more boats
The D7M uses the same pump adapter as the D7 and C7. That puts NRS boats, Kokopelli packrafts and Alpacka Raft from 2027 on the same family of Leafield valves.
For anyone who owns both a raft or inflatable kayak and a packraft, or who handles several boats on guided trips, that means one pump and one adapter can cover them all.
Ordering 2027 models in Japan
If this year follows the usual pattern, pre-orders open in December, with the earliest deliveries in January. Details will follow, together with the new Pack-A-Pump.
Sources
- Leafield Marine, “D7M Inflation / Deflation Valve” https://www.leafieldmarine.com/d7m-inflation-valve/ — checked November 15, 2026
- NRS, “Leafield Valves” https://nrs.com/learn/leafield-valves-overview-chart
- Kokopelli, “Leafield D7 Valve” https://kokopelli.com/products/leafield-d7-valve



Comments